Paint Strippers & Products
Grrrizzly Paint Stripper 
Grrrizzly is a heavy duty, fast acting paint remover. It will attack multiple layers of paint per application and will remove even the most difficult oil based paints, latex paints, varnish lacquer, varnish, and enamels. It is nonflammable and will not raise the grain of wood or corrode metals. (Click here for Spec Sheet & MSDS Information)
Lead Stop 
Lead Stop is a Lead Encapsulating Compound with a thick elastomeric coating that is a long lasting barrier over lead based paint. LEAD STOP provides a protective barrier coat that seals, blocks in lead that is contained in old lead based paints on previously painted surfaces. LEAD STOP protects the existing painted surfaces from further deterioration and has been specifically formulated to resist cracking from impact, surface movement and age for long term protection (Sold in 5 gallon pails). (Click here for MSDS Information)
Peel Away 1 by Dumond 
The Peel Away®1 System is an environmentally safe method for removing 30+coats of paint with a single application from most surfaces, (i.e., solid wood, brick, concrete, stone, stucco, plaster, cast iron, steel, marble, and fiberglass). The system includes a paste that is spread or sprayed over the surface to be stripped. The paste is then covered with fibrous laminated Peel Away® Paper, which controls evaporation and is left on until all of the paint is dissolved. The paste and paint adhere to the paper during removal. The stripped surface is then washed with clean water, and finally, neutralized. Peel Away®1 is excellent for intricate, carved, or molded surfaces, and is highly recommended for historic restorations and other projects involving lead-based paint abatement. (Click here for MSDS Information)
Peel Away 7 by Dumond 
A uniquely versatile, environmentally safe paint removal system, Peel Away®7 will remove most varieties of architectural paints and varnishes, as well as high-performance coatings such as epoxies, urethanes, acrylics, elastomerics, chlorinated rubber, aluminum, mastics, automotive and marine finishes. Peel Away®7 can be used on virtually all interior and exterior surfaces, and is excellent for intricate, carved and molded surfaces. Peel Away®7 Paste is brushed, rolled or sprayed over the surface to be stripped, and covered with Peel Away® Paper for the time frame (dwell time) determined during patch testing. (Because of its low evaporation rate, Peel Away® Paper may not be needed when using Peel Away®7 on large, outdoor projects. Patch test with and without paper to determine.) When stripping is complete, the paper, paste and paint are removed, and the stripped surface is washed with clean water. (Click here for MSDS Information)
Pronto Soy Based Graffiti Remover 
PRONTO Graffiti Remover is a soy-based gel that is designed and formulated to remove graffiti from almost any surface. Formulated to be a versatile product, PRONTO Graffiti Remover will cling to vertical surfaces and fill detailed, intricate areas in grooved or carved areas so that paint removal can be complete. PRONTO Graffiti Remover produces no toxic fumes, is non-flammable and is environmentally safe. (Click here for Spec Sheet & MSDS Information)
Pronto SuperSoy 
PRONTO SuperSoy is a soy-based gel that is designed and formulated to remove multiple layers of paint. Formulated to be a versatile product, PRONTO SuperSoy will cling to vertical surfaces as well as ceilings but will also fill detailed and intricate areas in grooved or carved areas so that paint removal can be complete. PRONTO SuperSoy produces no toxic fumes, is non-flammable and is environmentally safe. PRONTO SuperSoy has a very slow evaporation rate, which extends the stripping action and prevents the mixture from drying out prematurely. (Click here for Spec Sheet & MSDS Information)
Pronto Ultra Wash 
PRONTO Ultra Wash is a specially formulated final wash concentrate for use in Lead Abatement projects. PRONTO Ultra Wash is made of high tech emulsifiers, sequestering and chelating agents to form a powerful concentrate, which is dilutable up to 1:25. It is formulated to rinse freely and minimize any redeposition of hazardous residues. (Click here for Spec Sheet)
Mold and Mildew Abatement
DuraShield Microbiostat/Inhibitor 
DuraShield is Twin-Chem’s highly effective microbiostat / inhibitor. It is designed to be effective against most types of microbes - bacteria, mold, mildew, fungus and algae. DuraShield creates a long lasting and durable microbiostatic coating that retards the re-establishment of odors & stains caused by bacteria, mold, mildew and algae while preventing the growth of mold, mildew and algae. (Click here forMSDS Information)
MicroRid Disinfectant Cleaner 
MicroRid Disinfectant is Twin-Chem’s EPA-registered Disinfectant, Cleaner, Fungicide, Mildewstat, Virucide, Deodorizer and Sanitizer. It is a one-step Disinfectant and has been tested to kill over 80 different organisms including Aspergillus Niger, E.coli, Penecillium spinulosum, Salmonella, HIV, Hepatitis-B, Herpes, Poliovirus and many other pathogenic organisms. It is designed to be effective against all types of microbes such as bacteria, mold, mildew, fungus and algae and can be used on porous and nonporous materials. This is a hospital grade disinfectant which makes it an excellent choice for use on mold remediation projects. It is a powerful concentrate that will make up to 64 gallons of usable product from every gallon of MicroRid Disinfectant Cleaner. (Click here forMSDS Information)
| Documentation | |
|
Bacteria Swab Test Resutls Fungal Swab Test Results Press Release MicroRid vs. Bleach |
Results Bar Graph EMSL Lab Report Got Mold? Ad House Ad |
MicroRid Powdered Concentrate Mold & Mildew Stain/Odor Remover 
MicroRid is Twin-Chem’s unique and highly effective mold and mildew stain remover. It is designed to be effective against all types of microbes - bacteria, mold, mildew, fungus and algae. The powdered concentrate with its “rapid dispersion technology” quickly dissolves in water to create the most powerful water-based mold and mildew stain and odor remover on the market. MicroRid’s unique formulation is specifically designed to leave a long lasting “micro-layer” coating that retards the re-establishment of odors & stains caused by bacteria, mold, mildew and algae. (Click here for Spec Sheet & MSDS Information)
| MicroRid Images | |
| MicroRid Ad MicroRid Petry Dish Mold Dish After MicroRid |
Mold Infested Door Mold Infested Door 1/2 treated w/MicroRid Powder |
Twin-Chem AGR Adhesive and Glue Remover 
Twin Chem AGR is a unique product designed to remove most carpet adhesives and glues as well as most linoleum adhesives. Twin Chem AGR will also remove black asphaltic cut back. Twin Chem AGR is biodegradable and environmentally friendly. (Click here for Spec Sheet & MSDS Information)
Carpet Adhesive Removers 
STICK-M-UP CONCENTRATE Carpet and Carpet Adhesive Remover
- STICK-M-UP CONCENTRATE is a specially formulated carpet and carpet adhesive remover.
- STICK-M-UP CONCENTRATE allows for quick removal of glued down carpet and acrylic, latex and pressure sensitive adhesives from concrete, terrazzo, ceramic tile and other surfaces. It is designed to soften carpet adhesive so that carpet may be easily removed and to allow for easy scrape removal of the carpet adhesive. STICK-M-UP CONCENTRATE is water based, contains no petroleum distillates, has a low odor and low VOC. STICK-M-UP CONCENTRATE can be diluted up to 1:4. More difficult adhesives may require less dilution. (Click here for Spec Sheet & MSDS Information)
STICK-M-UP RTU 
Description - STICK-M-UP RTU is a specially formulated carpet and carpet adhesive remover. STICK-M-UP RTU allows for quick removal of glued down carpet and acrylic, latex and pressure sensitive adhesives from concrete, terrazzo, ceramic tile and other surfaces. It is designed to soften carpet adhesive so that carpet may be easily removed and to allow for easy scrape removal of the carpet adhesive. STICK-M-UP RTU is water based, contains no petroleum distillates, and has a low odor and low VOC (Sold in 5 gallon pails). (Click here for Spec Sheet & MSDS Information)
Tile Lifter Bar 
- Approximately 18# in weight
- Steel Bar Shaft 53.5 inches long
- D – Handle 5 inches wide, this handle may be made from pipe with the U shape made from ¼” steel
- Tapered Flange with rounded carriage bolt assembly 7.5 inches long
- Each side of the flange will be made from ¼” thick steel
- Note: these flanges must come to a sharp edge at an angle that will allow
- Floor tile to slide over the flanges and not but up against them and break.
- Entire assembly should be coated with Black Oxide or painted to prevent rusting.
- The two round head carriage bolts should be inserted and hand tightened to tapered flange.
Tile Lifter Blades 3.5 inch
|
 |
Tile Lifter Blades 6 inch 
- 6.0 x 7.5 inches with Slot
- Steel Capable of being Heat Treated/Case Hardened on the edges
